Release
by
PARALIGHTDCC
0.4 INCH SINGLE DIGIT DISPLAY
REV:A / 0
C-421E-A B/W
— STORAGE
1) The Display should be stored at 30℃ or less and 70% RH or less after being shipped from
PARA and the storage life limits are 3 months.
2) PARA Display lead frames are comprised of a stannum plated iron alloy. The silver surface
may be affected by environments which contain corrosive gases and so on. Please avoid
conditions which may cause the Display to corrode, tarnish or discolor. This corrosion or
discoloration may cause difficulty during soldering operations. It is recommended that the
Display be used as soon as possible.
3) Please avoid rapid transitions in ambient temperature, especially, in high humidity
environments where condensation can occur.
— HEAT GENERATION
1) Thermal design of the end product is of paramount importance. Please consider the heat
generation of the Display when making the system design. The coefficient of temperature
increase per input electric power is affected by the thermal resistance of the circuit board and
density of Display placement on the board, as well as other components. It is necessary to
avoid intense heat generation and operate within the maximum ratings given in this
specification.
2) The operating current should be decided after considering the ambient maximum temperature
of Display .
—OTHERS
1) Care must be taken to ensure that the reverse voltage will not exceed the absolute maximum
rating when using the Display with matrix drive.
2) Flashing lights have been known to cause discomfort in people; you can prevent this by taking
precautions during use. Also, people should be cautious when using equipment that has had
Display incorporated into it.
3) The Display described in this brochure are intended to be used for ordinary electronic
equipment (such as office equipment, communications equipment, measurement instruments
and household appliances). Consult PARA’s sales staff in advance for information on the
applications in which exceptional quality and reliability are required , particularly when the
failure or malfunction of the Display may directly jeopardize life or health (such as for airplanes,
aerospace, submersible repeaters, nuclear reactor control systems, automobiles, traffic control
equipment, life support systems and safety devices).
DRAWING NO. : DS-11-11-0362G
DATE : 2011-11-16
Page :9
PARALIGHT [ PARA LIGHT ELECTRONICS CO., LTD. ]
