0.56 INCH FOUR DIGITS DISPLAY
REV:A / 0
A-564G-A B/W
ꢁSOLDERING
METHOD
SOLDERING CONDITIONS
REMARK
ꢁSolder no closer than 2mm from
DIP
Bath temperature: 260 max
the base of the package
SOLDERING
Immersion time: with 5 sec ꢁUsing soldering flux,” RESIN FLUX”
is recommended.
ꢁDuring soldering, take care not to
Soldering iron: 30W or smaller
T
emperature at tip of iron: 260℃ or lower
PIN. Soldering time: within 5 sec. (To prevent heat from being
transferred directly to the PIN.)
press the tip of iron against the
SOLDERING
IRON
1) When soldering the PIN of Display in a jig that the package is fixed with a panel (See fIg.1), be
careful not to stress the PIN with iron tip. When soldering Display in a condition that the package is
fixed with a panel, be careful not to cling and stress the surface of Display on the panel to avoid
damaging the Display.
Fig.1
Regarding solution in the tinning oven for product-tinning, compound sub-solution made of tin &
copper and silver is proposed with the temperature of Celsius 260. The proportion of the
alloyed solution is tin 95.5: copper 3.5: silver 0.5 by percentage. The time of tinning is constantly
3 seconds.
DRAWING NO. : DS-14-06-0099
DATE : 2006-11-21
Page : 5
PARALIGHT [ PARA LIGHT ELECTRONICS CO., LTD. ]
