Assembly Information
Mounting of the LED-chain may be performed with screws or snap-in spacer (e.g. from Richco www.richco-int.com) by using Ø 4
mm holes in the circuit board.
The mounting of the LED-chain is carried out by attaching it at the mounting holes. Mounting screws should be treated with
synthetic washers to prevent circuit board damage and possible short circuiting.
To connect the LED-chain with each other or with OPTOTRONIC® Power Supply we recommend standard clamps. (e.g. WAGO
243-214 or 224-201)
Ordering Guide
Productgroup
BACKlight 2G
BACKlight 2G
BACKlight 2G
BACKlight 2G
BACKlight 2G
*) EAN: Ordering number per single module
S-Unit: Modules per shipping unit
Productname
BL04L-W3F-865
BL04S-W2-865
BL04S-W2-854
BL04S-T2
BL04S-B1
EAN *
4008321214706
4008321907370
4008321907356
4008321907318
4008321907332
S-Unit *
5
5
5
5
5
Note: Typical performance data are subject to change without any further notice, particularly as LED technology evolves.
Sales and Technical Support
OSRAM GmbH
Hellabrunner Strasse 1
D - 81536 München
Germany
www.osram.com
+49 (0)89 6213-0
Sales and technical support is given by the
local OSRAM subsidiaries.
On our world wide homepage all OSRAM
subsidiaries are listed with complete
address and phone numbers.
Related and Further Information
OPTOTRONIC® Data Sheets
OPTOTRONIC® Technical Guide
New creativity in lighting design
LED Modules for illuminated signs
http://catalog.myosram.com
130 T008 GB
138 W002 GB
BL04 - 20.12.2007
Page 4 of 4