edition 2013/05
Beschreibung
Description
Das System umfasst die folgenden Komponenten
The System contains the following parts
LED Modul OLM-018 xxxxx
LED Steuerung OEM-006 SY
Verbindungskabel LED-Modul / Steuerung
48 V DC Tischnetzteil
Typ: Mean Well GS120A48-G7B
Netzkabel (VDE) für 230V
LED module OLM-018 xxxxx
LED Controller OEM-006 SY
Cable LED module / controller
48 V DC power supply
Mean Well GS120A48-G7B
230 V power cable (VDE)
LED Modul OLM-018 xxxxx Air
LED module OLM-018 xxxxx Air
Kühlkörper (Aluminium)
48 V- Lüfter
Heat sink (aluminium)
48 V- fan
Größe 100 x 90 x 80 mm
Lichtemittierende Fläche 25 x 25 mm
LED- Chipzahl 60 (Matrix 10 x 6)
Gewicht 400 g
size 100 x 90 x 80 mm
light emitting area 25 x 25 mm
LED- Chip number 60 (10 x 6)
weight 400 g
Frontseite Glas, UV-entspiegelt
front side anti-reflective glass
Type
Peak wavelength
Typical power density
Max LED current DC
Forward Voltage
[nm] 3)
[W/cm²] 1)
4.5
[A]
2.1
2.1
2.1
2.1
[V] 2)
34
34
34
38
OLM-018 B460 Air
OLM-018 UV420 Air
OLM-018 UV390 Air
OLM-018 UV365 Air
455 – 465
420 - 425
390 – 395
365 – 370
3.5
3.5
1.5
1)
Measured @ 350 mA/chip, 25°C ambient temperature and in contact to emitting window, Power density
decreases with increasing temperature
Typical value @ 350 mA, 25 °C chip temperature
2)
3)
Measured @ 350 mA, 25 °C chip temperature
Other wavelength types possible on request in the range 365-1050 nm
400
300
200
100
0
0
20
40
60
board temperature [°C]
View angle
Temperature de-rating
Das LED Modul enthält einen PT-1000 Thermo-widerstand. In The LED Module contains a PT 1000 thermal resistor. In
Verbindung mit der Steuerung combination with the constant current supply OEM-006 SY
OEM-006 SY wird das Modul bei einer Temperatur von 55°C the module is switched off at 55°C and therefore protected
abgeschaltet und ist somit vor Übertemperatur geschützt against over temperature
© 2013/04
OSA Opto Light GmbH · Phone +49-(0)30-65762683 · contact@osa-opto.com