Page No. : 2/9
This integrated circuit can be damaged by ESD. Orister Corporation recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
Pin Assignment
DIP‐8
PACKAGE
PIN
1
2
SYMBOL
VDDG
VDD
DESCRIPTION
Internal Gate Driver Power Supply Pin
DC Power Supply Input Pin
Feedback input Pin. The PWM duty cycle is determined by voltage level into this
pin and the current‐sense signal at Pin 4
Current Sense Input Pin
HV MOSFET Drain Pin. The Drain pin is connected to the primary lead of the
transformer
3
FB
DIP‐8
4
SENSE
DRAIN
GND
5, 6
7, 8
Ground Pin
Ordering Information
DEVICE
DEVICE CODE
Y is package designator :
P: DIP‐8
Z is Lead Free designator :
RS2258 Y Z
P: Commercial Standard, Lead (Pb) Free and Phosphorous (P) Free Package
G: Green (Halogen Free with Commercial Standard)
DS‐RS2258‐09 May, 2010
www.Orister.com