PNSPO
®
OMRON NETWORK PRODUCTS
1.0 Description
The P1TX6-SX51-01M (TX-SX51) is an optical module
that transmits an HDMI™ signal on one strand of
multimode fiber. The TX-SX51 incorporates a bi-
directional optical subassembly (OSA) to convert and
transmit an uncompressed electrical HDMI™ video
signal, along with the HDCP/EDID/CEC functionality,
over distances of up to 1000m.
2.0 Features
• 5 transmit lanes and 1 receive lane over 1 multimode fiber
• Compatible with HDMI™ compliant sources and sinks
• Scalable to HDMI™ 1.3a 16-bit color
• On-board hardware and firmware for HDCP/EDID/CEC functionality
• Accepts TMDS inputs directly into its 40 pin plug-down connector
• Automatic laser disable upon fiber disconnect
This device is EXTREMELY SENSITIVE to Electrostatic Discharge (ESD). At a minimum, all handling must be
performed in accordance with an ANSI-compliant ESD Control Program (ANSI/ESD S20.20-2007) to mitigate
possible ESD-induced damage. Reliability and life of the device will be adversely affected if these precautions are
not met.
This device is a Class 3R Laser device (per IEC 60825-1:2007) and can cause damage to eye sight if used improperly. Refer to ANSI
Z136 for proper handling and usage of Class 3R devices.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ORIGINATOR:
B. Peters
DATE:
8/7/09
DOCUMENT NO.
DOC000924
D
P1TX6A-SX51-01M Product Specification Sheet
PNSPO!
SHEET 2 OF 10
CONFIDENTIAL INFORMATION