3.Optical Specifications
3.1.Optical Characteristics
Ta=25℃, 1/240 Duty,1/16 Bias, VOD=24.5V, θ= 0 ゚, φ=-゚
Parameter
Contrast Ratio
Symbol
Conditions
Min.
-
Typ.
20
Max.
-
Units
Note 1
CR
x
θ= 0 ゚, φ=-゚
Chromaticity (white)
-
-
-
0.324
0.361
-
y
-
-
Viewing Angle
Shown in 3.3
Response
Time
Rise Note 2
Decay Note 3
TON
-
-
-
-
540
160
810
240
ms
ms
TOFF
Note 1 : Contrast ratio is definded as follows.
CR = LON / LOFF
LON : Luminance of the ON segments
LOFF : Luminance of the OFF segments
Note 2 : The time that the luminance level reaches 90% of the saturation level from 0% when ON
signal is applied.
Note 3 : The time that the luminance level reaches 10% of the saturation level from 100% when OFF
signal is applied.
Note 4 : Definition of Driving Voltage VOD
VOD= VCC1-VADJ-VBE
Assuming that the typical driving waveforms shown below are applied to the LCD Panel at
1/A Duty - 1/B Bias ( A : Duty Number, B : Bias Number ). Driving voltage VOD is definded
as the voltage VO-P when the contrast ratio (CR=LON / LOFF) is at its maximum.
VO-P
×
( B-2 ) VO-P / B
×
1 / ( fF A )
1 / fF
〈
〉
〈
〉
ON SIGNAL
OFF SIGNAL
F-51167NCU-FW-AB (AB) No.2000-0182
OPTREX CORPORATION
Page 8/17
OPTREX