2
Optoway
BTRS-5601MG
*********************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3. 47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power
Output Center Wavelength
Output Spectrum Width
Extinction Ratio
Po
l
-15
1260
-8
1360
4
dBm
nm
1
nm
RMS (σ)
σl
ER
8.2
dB
Output Eye
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time
Optical Fall Time
tr
tf
1.2
1.2
ns
ns
10% to 90% Values
10% to 90% Values
Relative Intensity Noise
Total Jitter
RIN
TJ
-120
0.55
dB/Hz
ns
2
Electrical
Data Input Current – Low
Data Input Current – High
Differential Input Voltage
Data Input Voltage – Low
Data Input Voltage -- High
Disable Input Voltage -- Low
Disable Input Voltage -- High
Shut Off Time for TxDis
IIL
IIH
-350
mA
mA
mV
V
350
1600
-1.58
-0.74
0.8
VIH - VIL
VIL - VCC
VIH - VCC
VTDIS,L
VTDIS,H
tDIS
300
-2.0
3
3
-1.1
V
0
V
V
TX Output Enabled
TX Ouput Disabled
Vcc – 1.3
Vcc
1
ms
Notes: 1. Output power is power coupled into a 62.5/125 mm multi-mode fiber.
2. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
Receiver Specifications (0oC < Topr < 70oC, 3.13 V < Vcc < 3. 47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Sensitivity
---
Pin
Pa
---
-8
---
---
---
---
---
-26
---
dBm
dBm
dBm
dBm
dB
1
Maximum Input Power
Signal Detect -- Asserted
Signal Detect -- Deasserted
Signal detect -- Hysteresis
Wavelength of Operation
Optical Return Loss
---
-26
---
Transition: low to high
Transition: high to low
Pd
-40
1.0
1480
20
4.0
1580
nm
dB
2
ORL
Electrical
Data Output Voltage – Low
Data Output Voltage – High
SD Output Voltage -- Low
SD Output Voltage -- High
Signal Detect Assert Time
Signal Detect Deassert Time
VOL - VCC
VOH - VCC
VOL - VCC
VOH - VCC
ASMAX
-2.0
-1.1
-2.0
-1.1
-1.58
-0.74
-1.58
-0.74
100
V
V
3
3
V
V
3
3
ms
ms
OFF to ON
ON to OFF
ANSMAX
300
Notes: 1.Minimum sensitivity and saturation levels at BER 1E-=10 for a 223-1 PRBS.
2. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm.
3. These outputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.
*********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 10/1/2009 V4.0
OPTOWAY [ OPTOWAY TECHNOLOGY INC ]
