BTR-5920A-SP 参数 Datasheet PDF下载

Optoway

RECOMMENDED CIRCUIT SCHEMATIC

BTR-5920 / BTR-5920A

*************************************************************************************************************************************************************************

The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power

supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx

Vcc. A GND plane under the module is required for good EMI and sensitivity performance.

PACKAGE DIAGRAM

Units in mm

1) Pigtail Type

BTR-5920-SP50 / BTR-5920A-SP50

Note: Length L is 50± 3 cm. Other pigtail’s length is available upon request.

**************************************************************************************************************************************************************************

OPTOWAY TECHNOLOGY INC.

No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303

Tel: 886-3-5979798

E-mail: sales@optoway.com.tw

Fax: 886-3-5979737

http: // www.optoway.com.tw

6/30/2004 V2.0