Optoway
RECOMMENDED CIRCUIT SCHEMATIC
BTR-5820 / BTRR-5820A
**************************************************************************************************************************************************************************
The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power
supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx
Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
PACKAGE DIAGRAM
Units in mm
1) Pigtail Type
BTR-5820-SP50 / BTR-5820A-SP50
Note: Length L is 50
±
3 cm. Other pigtail’s length is available upon request.
**************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
E-mail: sales@optoway.com.tw
Fax: 886-3-5979737
http: // www.optoway.com.tw
6/30/2004 V2.0