Xeon 1 Power Infrared Emitter
LED
OSI3XAE1C1E
VER C.0
■
Handling of Silicone Lens LEDs
Notes for handling of silicone lens LEDs
●
Please do not use a force of over 3kgf impact or pressure on the silicone lens, otherwise it will cause a catastrophic
failure.
●
The LEDs should only be picked up by making contact with the sides of the LED body.
●
Avoid touching the silicone lens especially by sharp tools such as Tweezers.
●
Avoid leaving fingerprints on the silicone lens.
●
Please store the LEDs away from dusty areas or seal the product against dust.
●
When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and
place nozzle, except that mechanical pressure on the silicone lens must be prevented.
●
Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)
LED & Application Technologies
OPTOSUPPLY [ OptoSupply International ]
