NOTE: The systems in this category offer transmission of certain signals in set
configurations. If your application involves multi-signal transmission and/or would
benefit from system upgradeability, please visit the Optiva™ Platform section on
page 14. To configure an Optiva™ system to your precise needs, please register for
the ‘Product Configurator’ at www.opticomm.com
SDI & HD-SDI
Video
™
Optiva Configurable
Standard
Pathological Test Code
Nominal Bit Rate
Bit error rate
SMPTE 292M & 259M
RP-178
Communication Platform
Network Management
SDI & HD-SDI
1.485 Gbps; 270 Mbps
-14
10
Connector
BNC (IEC 60169-8; Gold Plated)
Composite Video,
Audio & Data
Data
Connector
Micro DB25
RGB/VGA/DVI
Audio/FSK/Intercom
RS-232, RS-422
Data Rate
DC to 1 Mbps
DC to 1 Mbps
DC to 1 Mbps
DC to 1 Mbps
RS-485 (2 Wire)
Data Rate
Data (Ethernet/Serial/USB)
CATV/RF & L-Band
RS-485 (4 Wire)
Data Rate
Optical Switching, Routing
& Redundancy
Contact Closure
Data Rate
Passive Multiplexing
Solutions
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Enclosures, Racks
& Frames
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
-20° C to +55° C
11 oz
-40° C to +85° C
Power Supplies
& Accessories
0 to 95% non-condensing
9-12 VDC
Operating voltage
Consumption
1A Max per Insert Card
Less than 1ms
System Latency
Local Monitoring
LED Status Indication
™
Remote Monitoring
Compatible with OptivaView
SNMP Management Suite
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety:
UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
Sample Configuration
HD-SDI
HD-SDI
OTS-1HDT2DTR
OTS-1HDR2DTR
Second Output
Local Loopback