Optiva
™
Standard,
1 Composite Video, 2 Duplex Analog Audio
and 1 Duplex RS-232/422/485 Data
OTS-1V2ATR1DTR
Composite Video, Audio and Serial Data
Transmission
The OTS-1V2ATR1DTR provides for the
digital transmission of 1 Channel of
Composite Video, 2 Channels of Duplex
Analog Audio and 1 Channel of Duplex
Serial Data.
System Design
S
T
A
T
U
S
A
L
E
R
T
Video
2 Analog
Audio In/Out
Serial Data
In/Out
S
T
A
T
U
S
A
L
E
R
T
2 Analog
Audio Out/In
Serial Data
Out/In
Each insert card comes with a label
identifying the specific protocols
handled, connector pin-out and other
vital information.
For optimal bandwidth allocation,
each insert card can daisy-chain with
an additional card in the same chassis.
See “Optiva
™
Upgrade Path”.
Audio
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva
™
Desktop
Card Racks (OT-DTCR Series).
The Optiva
™
Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
Optiva
™
Upgrade Path
Composite
Video In
ST, Dual LC,
SC or FC
Composite
Video Out
ST, Dual LC,
SC or FC
™
Optiv
a
™
Optiv
a
Data
VAD Transmission
VAD Transmission
OTS-1VT2ATR1DTR
OTS-1VR2ART1DRT
Features
• Composite Video, Analog Audio and Serial Data
• 10-Bit Digital Transmission
• TDM - Single fiber, dual wavelength
• Complies with SMPTE standards for Video transmission
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Ideal for Professional AV applications
This system can be purchased without
an optical port as an add-on to an existing
Optiva
™
system daisy-chain.
(See “Non-Optical Version” below).
The Optiva
™
bandwidth requirement
of this system is 370 Mbps.
Versions Available*
Wavelength (nm)
& Fiber
1310/1550 Multimode
1310/1550 Singlemode
1310/1550 SM (
D
)
1310/1550 SM (
H
)
1270-1610 SM (
CWDM
)
Non-Optical Version
Transmit/Receive**
OTS-1VT2ATR1DTR-A1/A3M-XX-IC
OTS-1VT2ATR1DTR-A2/A3-XX-IC
OTS-1VT2ATR1DTR-A2/A3D-XX-IC
OTS-1VT2ATR1DTR-A2/A3H-XX-IC
OTS-1VT2ATR1DTR-L4/L4-XX-IC
OTS-1VT2ATR1DTR-NOC-IC
Receive/Transmit**
Optical
Connector
Optical Budget
(dB)
10
12
17
25
Varies
N/A
Range***
(km) Form Factor
3
20
40
60
20-70
N/A
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
OTS-1VR2ATR1DRT-A3M/A1-XX-IC
OTS-1VR2ATR1DRT-A3/A2-XX-IC
OTS-1VR2ATR1DRT-A3D/A2-XX-IC
OTS-1VR2ATR1DRT-A3H/A2-XX-IC
OTS-1VR2ATR1DRT-L4/L4-XX-IC
OTS-1VR2ATR1DRT-NOC-IC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
ST, FC, Dual LC or SC
N/A
Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm;
"ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z.
Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W).
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, Dual LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
OPTICOMM [ Opticomm Corporation ]
