CCTV Security
Networking
Video
Video in/out impedance
Video in/out level
Video bandwidth
Differential gain
Differential phase
Linearity
75 Ω
Selection Guide
1 volt peak to peak, 1.5 volts max
5 Hz to 8 MHz @ -3dB
< 1.0 % typical
Digital Broadcast
AM/IM Analog
SSWWFFMM AAnnaalloogg
Analog-to-Digital
RGB Video
< 1.0° typical
1.1 % typical
Tilt
≤ 0.5 % typical
Compatibility
NTSC, PAL, SECAM, RS-170, RS-170A
>67 dB using RS-250C standards @ 1 km
70 MHz
Signal to noise ratio
FM carrier frequency
Connector type
Datacom
BNC
RF CATV
Audio
Audio in/out impedance
Audio in/out level
600 Ω (balanced) or 10 kΩ (unbalanced)
-6 to +6 dBm
Appendix
Frequency response
Signal to noise ratio
Total harmonic distortion
Connector type
10 Hz to 20 KHz
> 60 dB
< 1.0 %, 1 KHz at maximum modulation
Hi-density 15 pin DB9 (DE15)
General
Dimensions & Weight
Stand Alone (SA): 7.16” L x 5.21” W x .94” H
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
-40° C to +74° C
39 oz
16 oz
Opticomm
reserves the
right to change
product
Operating temperature
Storage temperature
Humidity
-55° C to +85° C
specifications
without notice.
0 to 95% non-condensing
Operating voltage
Vibration
12 VDC (200 mA) or 9-24 VAC (300mA) or 110/220 VAC
Up to 5 g's
Shock
Up to 12 g's
Diagnostics
Status monitoring
LED indicator
Emissions: FCC Part 15, ICES-003,
AS/NZS, 3548, EN55022
Immunity: ENVS0204,
EN61000-4-2,3,4,5,6,11
Safety:
UL1950, CAN/CSA 22.2,
NO.950-95
MADE IN THE USA
Sample Configuration
45