Analog Fiber Optic Transmission System
Duplex Analog Fiber Optic Transmission
System
FMV-100K
Video
The Opticomm FMV-100K System is a
duplex analog fiber optic transmission
system. The system is capable of
transmitting an Analog FSK signal at a
system bandwidth between 300Hz and
100KHz.
The FMV-100K/TR-T50R10-FC-IC transmits
at 1550nm and receives at 1510nm
wavelengths. The FMV-100K/TR-T10R50-
FC-IC transmits at 1510nm and receives
at 1550nm wavelengths.
The system offers a link budget of at least
30dB over one single-mode fiber using a
Coarse Wave Division Multiplexer
operating over 1510nm and 1550nm
wavelengths for bi-directional capability.
System Design
Features
Audio
Data
• Singlemode Operation Over One Fiber
• 0-30dB Link Budget
• Ruggedized Industrial Enclosure
• No EMI or RFI and no ground loops
• Rack-Mountable
• High MTBF
• Wide Temperature Range
The Models FMV-100K/TR-T50R10-FC-IC
and FMV-100K/TR-T10R50-FC-IC are insert
card transceivers. These units are plug-in
card assemblies compatible with
Opticomm's CC-16B 19” rack-mountable
chassis.
An insert card combined with a CC-16B
chassis would be installed within a 19”
distribution frame, typically found in a
control room or hub.
All insert cards are swappable. Up to
16 FMV-100K insert cards can be housed
in one CC-16B chassis with up to two
PS-1205 power supplies for redundancy.
1510
1550
Type
Laser
(DFB)
Mode
SM
Fiber
Type
09/125µ
Output
Power
0 dBm
Receiver
Sensitivity
-30 dBm
Optical
Loss
Budget
30 dB
Conn
Type
FC
•
•
800-867-8426 • info@opticomm.com • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
OPTICOMM [ Opticomm Corporation ]
