Applications
OH02A10
¬
Medical Endoscopes
¬
¬
Dental Equipment
¬
Veterinarian Endoscopes
Industrial Endoscopes
Ordering Information
¬
OH02A10-A34A-SA
(color, lead-free) 34-pin CSP with dual anti-reflective coating cover glass,
packed in tape and reel with protective film
Product Features
¬
¬
¬
1.4 µm x 1.4 µm pixel
¬
¬
¬
supports 2x2 binning
optical size of 1/6"
standard serial SCCB interface
programmable controls for:
- frame rate
- mirror and flip
- cropping
- windowing
up to 2-lane MIPI serial output
interface (supports maximum speed
up to 1000 Mbps/lane)
Product Specifications
¬
active array size: 1920 x 1080
¬
¬
¬
¬
lens chief ray angle: 33° non-linear
max S/N ratio: 38.3 dB
¬
embedded 2 kilobits of one-time
programmable (OTP) memory
for customer use
¬
power supply:
- core: 1.2V
- analog: 2.8V
- I/O: 1.8V
¬
¬
supports output formats:
- 10-bit RAW data
dynamic range: 73.3 dB @ 15.5x gain
¬
¬
add staggered HDR raw data output
supports images sizes:
- 1080p (1920x1080)
- 720p (1280x720)
- VGA (640x480)
- QVGA (320x240)
- QQVGA (160x120)
maximum image transfer rate:
- 1080p: 60 fps
- 720p: 90 fps
interleave row high dynamic range
(iHDR) output
¬
¬
power requirements:
- active: 90 mW
- standby: 210 µA
- XSHUTDN: 0.6 µA
¬
¬
programmable I/O drive capability
¬
sensitivity: 553 mV/Lux-sec
-
(6750 e /Lux.sec)
support for LENC color shading
correction
temperature range:
- operating: -30°C to +85°C junction
temperature
- stable image: 0°C to +60°C junction
temperature
¬
¬
¬
¬
¬
scan mode: progressive
maximum exposure interval: 1112 × tROW
pixel size: 1.4 µm x 1.4 µm
¬
¬
¬
output format: 10-bit RGB RAW
lens size: 1/6"
image area: 2728.8 µm x 1549.8 µm
package dimensions:
- CSP: 3855 µm x 2919 µm
input clock frequency: 6 ~ 27 MHz
Functional Block Diagram
OH02A10
image sensor core
image
sensor
processor
image
interface
column
sample/hold
MCP/N
MDP/N[1:0]
image
AMP
10-bit
ADC
array
gain control
control register bank
SCCB interface
PLL PLL
timing generator and system control logic
OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision, the OmniVision logo and PureCel are registered
trademarks of OmniVision Technologies, Inc. All other trademarks are the property of their
respective owners.
4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: + 1 408 567 3000
Fax: + 1 408 567 3001
www.ovt.com
Version 1.1, January 2019
OMNIVISION [ OMNIVISION TECHNOLOGIES, INC. ]
