PEDL9055A-02-01
1
Semiconductor
ML9055A-02
PIN CONFIGURATION (STANDARD TCP: BRONZE-FOIL FACE UP)
NC1
PS0
PS1
CS
RESET
RS
R/W (WR)
E (RD)
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
V
DD
VCI
V
SS
VOUT
C5+
C3+
C1–
C1+
C2+
C2–
C4+
REF
VEXT
INTRS
V4
V3
V2
V1
V0
VR
TEST1
NC2
NC
NC1
COM113
COM112
COM111
COM110
COM66
COM65
COM64
SEG127
SEG126
SEG2
SEG1
SEG0
COM14
COM15
COM60
COM61
COM62
COM63
NC
NC2
Note 1: This drawing is not a true external view of TCP, but it primarily shows the TCP pin layout.
Note 2: The TCP shown above is a standard TCP and does not have COM0 to COM13 pins and
COM114 to COM127 pins. Also there is no TEST2 pin on the TCP.
(In the TCP, 128 lines from SEG0 to SEG127 and 100 lines from COM14 to COM113 are
derived as the output pins.)
The external shape and the number of output pins of TCP can be customized as needed.
Note 3: Do not connect the NC pins to outside or any other pins. NC stands for “No Connection”. The NC
pins are not connected to the chip. All NC pins are independent.
NC1 remains connected to COM112 before dicing. Although the input side NC1 remains
connected with the output side NC1 by dicing, the connection with COM112 is lost.
Similarly, NC2 remains connected to COM63 before dicing. Although the input side NC2
remains connected with the output side NC2 by dicing, the connection with COM63 is lost.
3/59
OKI [ OKI ELECTRONIC COMPONETS ]
