PEDL9051G-01
OKI Semiconductor
ML9051G
Note 5: When using an external power supply, follow the procedure for power application.
When applying external power to the VOUT pin only, apply VOUT after VDD.
When applying external power to the V1 pin only, apply V1 after VDD.
When applying external power to the V1 pin to V5 pin, apply V1 to V5 after VDD.
Note that the above (Note 4) must be satisfied including transient state at power application.
Note 6: When using an external power supply, follow the procedure for power removal described
below.
When external power is in use for the VOUT pin only, remove VOUT after VDD.
When external power is in use for the V1 pin only, remove V1 after VDD.
When external power is in use for the V1 pin to V5 pin, remove V1 to V5 after VDD.
Note that the above (Note 4) must be satisfied including transient state at power removal.
4/74
OKI [ OKI ELECTRONIC COMPONETS ]
