FEDL70512-04
OKI Semiconductor
ML70512
SPECIFICATIONS
Process
Package
0.16
µm
CMOS (5-layer metal wire)
83-pin WCSP (P-VFLGA83-6.22×6.22-0.50-W)
(Dimensions: 6.22 mm
×
6.22 mm
×
0.48 mm; pin pitch: 0.50 mm)
84-pin BGA (P-LFBGA84-0909-0.80)
(Dimensions: 9 mm
×
9 mm
×
1.5 mm; pin pitch: 0.80 mm)
23.4 mA (24 MHz operation)
2.70 to 3.6 V for input-output, 1.65 to 1.95 V for internal circuits
24 MHz
384 KB (for ARM program)
72 KB
12 MHz, 13 MHz, or 16 MHz (system clock)
32 kHz or 32.768 kHz (LPO clock)
OKI RF-LSI interface (ML7050, ML70561)
SKYWORKS RF-LSI interface (CX72303)
BROADCOM RF-LSI interface (BCM2002X)
UART interface (up to 921.6 Kbps)
General-purpose I/O interface (Bits 0 and 1 are used as a pin for I
2
C bus
interface
depending on software installed)
PCM interface (PCM Linear/A-law/µ-law can be selected)
DETACH interface
16-bit auto reload timer (1ch)
18-bit auto reload timer (3ch)
11 causes
Crystal oscillator circuit (12 MHz, 13 MHz, or 16 MHz, 32 kHz or 32.768
kHz)
Internal PLL
Supply current
Operating voltage ranges
Operating frequency
Built-in ROM size
Built-in RAM size
Input clocks
RF-LSI interface
Installed interfaces
Timers
Interrupt controller
Clock control circuit
2/29
OKI [ OKI ELECTRONIC COMPONETS ]
