¡ Semiconductor
ML63512/63514
PIN DESCRIPTIONS
The basic functions of each pin of the ML63512/63514 are described in Table 1.
A symbol with a slash (/) denotes a pin that has a secondary function.
Refer to Table 2 for secondary functions.
For type, "—" denotes a power supply pin, "I" an input pin, "O" an output pin, and "I/O" an input-
output pin.
For pin, "TB" denotes a 48-pin flat package (48TQFP), and "TP" a 64-pin flat package (64TQFP).
Table 1 Pin Descriptions (Basic Functions)
Function Symbol
V
DD
V
SS
V
DDI
Power
Supply
V
DDH
CB1
CB2
XT0
24
25
26
28
30
35
36
38
—
—
—
I
V
DDL
Pin
TB
23
22
21
27
TP
29
28
27
37
Type
—
—
—
—
Positive power supply
Negative power supply
Positive power supply pin for external interface (PORT8 supply)
Positive power supply pin for internal logic (internally generated).
A capacitor C
l
(0.1
mF)
should be connected between this pin and V
SS
.
Voltage multiplier pin for power supply backup (internally generated).
A capacitor C
h
(1.0
mF)
should be connected between this pin and V
SS
.
Pins to connect a capacitor for voltage multiplier.
A capacitor (1.0
mF)
should be connected between CB1 and CB2.
Low-speed clock oscillation pins.
Crystal oscillation or RC oscillation is selected by the mask option.
If crystal oscillation is selected, connect a crystal between XT0 and
XT1, and connect capacitor (C
G
) between XT0 and V
SS
.
XT1
29
39
O
If RC oscillation is selected, connect external oscillation resistor
(R
CRL
) between XT0 and XT1.
High-speed clock oscillation pins.
Oscillation
OSC0
33
43
I
Ceramic oscillation or RC oscillation is selected by the mask option.
If ceramic oscillation is selected, connect a ceramic resonator
between OSC0 and OSC1, and connect capacitor (C
L0
, C
L1
) between
OSC0 and V
SS
, OSC1 and V
SS
.
OSC1
34
44
O
If RC oscillation is selected, connect external oscillation resistor
(R
CRH
) between OSC0 and OSC1.
External oscillation resistor connection pin for high-speed RC
OSCM
TST1B
TST2B
32
30
31
42
40
41
O
I
I
oscillation.
This pin is used when external capacitor is selected by mask option.
Test
Input pins for testing.
A pull-up resistor is internally connected to these pins.
Reset input pin.
Setting this pin to "L" level puts this device into a reset state.
Reset
RESETB
35
45
I
Then, setting this pin to "H" level starts executing an instruction
from address 0000H.
An internal or external pull-up resistor is selected by mask option.
Melody
MD
36
46
O
Melody output pin (non-inverted output)
Description
7/29