ODHKGL4146-A-04
KGL4146-A
SAFETY AND HANDLING INFORMATION ON GaAs DEVICES
Arsenic Compound (GaAs Devices)
The product contains arsenic (As) as a compound.
This material is stable for normal use, however, its dust or vapor may be potentially hazardous to the human
body.
Avoid ingestion, fracture, burning or chemical treatment to the product.
•
Do not put the product in your mouth.
•
Do not burn or destroy the product.
•
Do not perform chemical treatment for the product.
Keep laws and ordinances related to the disposal of the products.
ESD CONSIDERATIONS
This device can be damaged by ESD; therefore appropriate precautions must be taken to avoid exposure to ESD
and EOS during handling, assembly, and testing of these devices. Failure to adhere to proper ESD/EOS
precautions during handling and assembly of these devices can damage or adversely affect device reliability.
NOTICE
1.
2.
The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information being referred to is up-to-date.
The outline of action and examples for application circuits described herein have been chosen as an
explanation for the standard action and performance of the product. When planning to use the product, please
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.
When designing your product, please use our product below the specified maximum ratings and within the
specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating
temperature.
OKI SEMICONDUCTOR assumes no responsibility or liability whatsoever for any failure or unusual or
unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident,
improper handling, or unusual physical or electrical stress including, but not limited to, exposure to
parameters beyond the specified maximum ratings or operation outside the specified operating range.
Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is
granted by us in connection with the use of the product and/or the information and drawings contained herein.
No responsibility is assumed by us for any infringement of a third party’s right which may result from the use
thereof.
The products listed in this document are intended for use in general electronics equipment for commercial
applications (e.g., office automation, communication equipment, measurement equipment, consumer
electronics, etc.). These products are not authorized for use in any system or application that requires special
or enhanced quality and reliability characteristics nor in any system or application where the failure of such
system or application may result in the loss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace
equipment, nuclear power control, medical equipment, and life-support systems.
Certain products in this document may need government approval before they can be exported to particular
countries. The purchaser assumes the responsibility of determining the legality of export of these products
and will take appropriate and necessary steps at their own expense for these.
No part of the contents contained herein may be reprinted or reproduced without our prior permission.
Copyright 2008 OKI SEMICONDUCTOR CO., LTD.
3.
4.
5.
6.
7.
8.
6/6
OKI [ OKI ELECTRONIC COMPONETS ]
