1.4KESD5.0 thru 1.4KESD170CA, e3
AXIAL-LEAD TVS
SCOTTSDALE DIVISION
DESCRIPTION
These small axial-leaded TVS devices feature the ability to clamp
dangerous high voltage short-term transients such as produced by directed
or radiated electrostatic discharge phenomena before entering sensitive
component regions of a circuit design. They are small economical transient
voltage suppressors targeted primarily for short-term transients below a few
microseconds while still achieving significant peak-pulse-power capability
as illustrated in Figure #1.
APPEARANCE
WWW .
Microsemi
.C
OM
DO-35
(DO-204AH)
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
FEATURES
•
Excellent protection in clamping direct ESD level
transients in excess of 15,000 V per MIL-STD-750,
Method 1020 (approx. 150 ns exponential wave)
•
Absorbs ESD level transients* of 1400 Watts per MIL-
STD-750, Method 1020 (approx. 150 ns exponential
wave, or one microsecond transients up to 400 watts.
See Figure #1 and #2 for overall transient Peak Pulse
Power.
•
Clamps Transients in less than 100 picoseconds
•
Working Stand-off Voltage range of 5 V to 170 V
•
Hermetic DO-35 Package. Also available in surface
mount DO-213AA MELF package (see separate data
sheet)
•
RoHS Compliant devices available by adding “e3” suffix
APPLICATIONS / BENEFITS
•
Protects Sensitive circuits from short duration fast
rise time transients such as Electrostatic Discharge
(ESD) or Electrical Fast Transients (EFT)
•
Low inherent capacitance for high-frequency
applications (See Figure #4)
•
Flexible axial-lead mounting terminals
•
Bidirectional features available by adding a “C” or
“CA” suffix
MAXIMUM RATINGS
•
400 Watts for One Microsecond Square Wave or
1400 watts per ESD Wave form of MIL-STD-750,
method 1020.
•
See Surge Rating curve in Figures #1 and 2.
o
o
•
Operating and storage temperature –65 C to 175 C
•
THERMAL RESISTANCE: Less than 250
o
C/W
junction to lead at 0.375 inches from body.
•
DC power dissipation 500 mW at T
L
= 75
o
C at 3/8
inch (10 mm) lead length from body.
•
Derate at 2.3 W/
o
C above 25
o
C for P
PP
(1μs) and at
o
o
5 mW/ C above 100 C for dc power.
o
•
Forward Surge Current 50 amps for 1μs at T
L
= 25 C
(rise time > 100 ns).
MECHANICAL AND PACKAGING
•
CASE: Hermetically sealed axial-lead glass DO-35
(DO-204AH) package
•
FINISH: Tin-lead or RoHS Compliant matte-Tin
plating solderable per MIL-STD-750, method 2026
•
POLARITY: Banded end is cathode
•
WEIGHT: 0.2 grams (typical)
•
MARKING: Part number
•
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
•
See package dimension on last page
1.4KESD5.0 thru
1.4KESD170A, e3
Copyright
©
2006
3-29-2006 REV B
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1