欢迎访问ic37.com |
会员登录 免费注册
发布采购

16F84A 参数 Datasheet PDF下载

16F84A图片预览
型号: 16F84A
PDF下载: 下载PDF文件 查看货源
内容描述: 18引脚闪存/ EEPROM的8位微控制器 [18-pin Flash/EEPROM 8-Bit Microcontrollers]
分类和应用: 闪存微控制器可编程只读存储器电动程控只读存储器电可擦编程只读存储器
文件页数/大小: 124 页 / 1272 K
品牌: MICROCHIP [ MICROCHIP ]
 浏览型号16F84A的Datasheet PDF文件第1页浏览型号16F84A的Datasheet PDF文件第2页浏览型号16F84A的Datasheet PDF文件第4页浏览型号16F84A的Datasheet PDF文件第5页浏览型号16F84A的Datasheet PDF文件第6页浏览型号16F84A的Datasheet PDF文件第7页浏览型号16F84A的Datasheet PDF文件第8页浏览型号16F84A的Datasheet PDF文件第9页  
PIC16F8X  
Table 1-1 lists the features of the PIC16F8X. A simpli-  
fied block diagram of the PIC16F8X is shown in  
Figure 3-1.  
1.0  
GENERAL DESCRIPTION  
The PIC16F8X is a group in the PIC16CXX family of  
low-cost, high-performance, CMOS, fully-static, 8-bit  
microcontrollers. This group contains the following  
devices:  
The PIC16F8X fits perfectly in applications ranging  
from high speed automotive and appliance motor  
control to low-power remote sensors, electronic locks,  
security devices and smart cards. The Flash/EEPROM  
technology makes customization of application  
programs (transmitter codes, motor speeds, receiver  
frequencies, security codes, etc.) extremely fast and  
convenient. The small footprint packages make this  
microcontroller series perfect for all applications with  
space limitations. Low-cost, low-power, high  
performance, ease-of-use and I/O flexibility make the  
PIC16F8X very versatile even in areas where no  
microcontroller use has been considered before  
(e.g., timer functions; serial communication; capture,  
compare and PWM functions; and co-processor  
applications).  
• PIC16F83  
• PIC16F84  
• PIC16CR83  
• PIC16CR84  
All PICmicro™ microcontrollers employ an advanced  
RISC architecture. PIC16F8X devices have enhanced  
core features, eight-level deep stack, and multiple  
internal and external interrupt sources. The separate  
instruction and data buses of the Harvard architecture  
allow a 14-bit wide instruction word with a separate  
8-bit wide data bus. The two stage instruction pipeline  
allows all instructions to execute in a single cycle,  
except for program branches (which require two  
cycles). A total of 35 instructions (reduced instruction  
set) are available. Additionally, a large register set is  
used to achieve a very high performance level.  
The serial in-system programming feature (via two  
pins) offers flexibility of customizing the product after  
complete assembly and testing. This feature can be  
used to serialize a product, store calibration data, or  
program the device with the current firmware before  
shipping.  
PIC16F8X microcontrollers typically achieve a 2:1 code  
compression and up to a 4:1 speed improvement (at 20  
MHz) over other 8-bit microcontrollers in their class.  
The PIC16F8X has up to 68 bytes of RAM, 64 bytes of  
Data EEPROM memory, and 13 I/O pins. A timer/  
counter is also available.  
1.1  
Family and Upward Compatibility  
Those users familiar with the PIC16C5X family of  
microcontrollers will realize that this is an enhanced  
version of the PIC16C5X architecture. Please refer to  
Appendix A for a detailed list of enhancements. Code  
written for PIC16C5X devices can be easily ported to  
PIC16F8X devices (Appendix B).  
The PIC16CXX family has special features to reduce  
external components, thus reducing cost, enhancing  
system reliability and reducing power consumption.  
There are four oscillator options, of which the single pin  
RC oscillator provides a low-cost solution, the LP  
oscillator minimizes power consumption, XT is  
a
1.2  
Development Support  
standard crystal, and the HS is for High Speed crystals.  
The SLEEP (power-down) mode offers power saving.  
The user can wake the chip from sleep through several  
external and internal interrupts and resets.  
The PIC16CXX family is supported by a full-featured  
macro assembler, a software simulator, an in-circuit  
emulator, a low-cost development programmer and a  
full-featured programmer. A “C” compiler and fuzzy  
logic support tools are also available.  
A highly reliable Watchdog Timer with its own on-chip  
RC oscillator provides protection against software lock-  
up.  
The devices with Flash program memory allow the  
same device package to be used for prototyping and  
production. In-circuit reprogrammability allows the  
code to be updated without the device being removed  
from the end application. This is useful in the  
development of many applications where the device  
may not be easily accessible, but the prototypes may  
require code updates. This is also useful for remote  
applications where the code may need to be updated  
(such as rate information).  
1998 Microchip Technology Inc.  
DS30430C-page 3