TECHNICAL DATA
KK1207
COMMAND 2 : DATA SETTING COMMANDS
The Data Setting Commands executes the Data Write Mode for KK1207. The Data Setting
Command, the bits5 and 6 (b4, b5) are ignored, bit7(b6) is given the value of “1” while bit8(b7) is
given the value of “0”. Please refer to the diagram below.
When power is turned ON, bit 4 to bit 1 (b3 to b0) are given the value of “0”.
LSB
MSB
0
1
-
-
b3 b2 b1 b0
Data Write Mode Settings :
00 : Write Data to Display Mode
Don’t Care
Address Increment Mode Settings (Display Mode):
0 : Increment Address after Data has been Written
1 : Fixes Address
Mode Settings :
0 : Normal Operation Mode
1 : Test Mode
5
KODENSHI [ KODENSHI KOREA CORP. ]
