3.5 x 2.8 mm Surface Mount SMD Chip LED
DESCRIPTIONS
The Hyper Red device is based on light emitting diode
chip made from AlGaInP
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode
The Blue source color devices are made with InGaN
on Sapphire Light Emitting Diode
Electrostatic discharge and power surge could
Damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded
PACKAGE DIMENSIONS
FEATURES
Suitable for all SMD assembly and solder process
Available on tape and reel
Package: 2000pcs / reel
Moisture sensitivity level: 3
RoHS compliant
APPLICATIONS
Backlight
Status indicator
Home and smart appliances
Wearable and portable devices
Healthcare applications
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Iv (mcd) @ 20mA
[2]
Lens Type
Min.
400
Water Clear
400
80
Typ.
500
580
130
130
°
Viewing Angle
[1]
2θ1/2
■
Hyper Red
(AlGaInP)
■
Green (InGaN)
■
Blue (InGaN)
Notes:
1.
θ1/2
is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO2424 / 1201009036 Rev No: V.2B Date: 07/15/2017
Page 1 / 5
KINGBRIGHT [ KINGBRIGHT CORPORATION ]
