DA1 SERIES CONNECTORS
0.60mm (.024") Contact Spacing, PCB-to-Cable Connectors
• • • • • • • • • • • • • •
DA1 Series connectors are low profile SMT compact interface
connectors for use in compact and slim mobile information terminal
devices such as PDAs, HPCs, and notebook PCs.
GENERAL SPECIFICATIONS
Number of Contacts
Contact Spacing
Current Rating
10, 18, and 26
0.60mm (.024”)
0.5 Amp Signal per contact
1 Amp Poweer per contact
Dielectric Withstanding Voltage
Insulation Resistance
Contact Resistance
250 VAC r.m.s. (for one minute)
100 megohms min.
50 milliohms max.
-25°C to +75°C
Operating Temperature
Applicable Wire Sizes
FEATURES
AWG #28 max.
• Mating height 3.0mm (.012"), mounting space
reduced, 0.60mm (.024") pitch single line SMT
interface connector
MATERIALS AND FINISHES
Description
Insulator
Materials/Finishes
Nylon (UL94V-0, Black)
• Metal shell provides shielding against EMI
and static electricity
Pin Contact
Lead Contact
Shell
Copper Alloy, Gold plating over Lead-Nickel
Tin-Lead plating
• Side locking system
• Board mounting plug for cradle (catcher)
available for 18 contact version
Steel, Nickel plating
ORDERING INFORMATION
• Receptacles and cradles available in embossed
tape for automatic SMT mounting
DA1 – * – 0** – * – 9 – *
E
Series
Contact Type
R – Receptacle
P – Plug
Connector Profile (Ref.)
19.1
(.752)
Ref.
B – Cradle
No. of Contacts
10, 18 and 26
Termination
3
3
(.118)
(.118)
H – Right angle with Hold-down
(10 and 18 position only)
L – Right angle without Hold-down
(26 position only)
34.2
(1.346)
Ref.
1.2
(.047)
Ref.
8.7
(.343)
M – Cable Plug
3
(.118)
Contact Finish
9 – Gold plating
Palladium Nickel
Modification Code
Consult JAE
Lead Free Version
Dimensions in mm (inches).
79
JAE [ JAPAN AVIATION ELECTRONICS INDUSTRY, LTD. ]
