TS-SS-11-X.X Drawing
Note: Screw needs to be calibrated for a specific
torque.
Use part numbers shown in the table below to
order appropriate screwOrdering
Information
Top View
Part Number
TS-SS-11-3.0
TS-SS-11-3.5
Torque (in. lbs)
3.0
3.5
4.0
TS-SS-11-4.0
TS-SS-11-4.5
TS-SS-11-5.0
4.5
5.0
5.5
6.0
44.7
Ø 36
TS-SS-11-5.5
TS-SS-11-6.0
TS-SS-11-6.5
6.5
7.0
7.5
8.0
Side View
TS-SS-11-7.0
TS-SS-11-7.5
TS-SS-11-8.0
TS-SS-11-8.5
1
8.5
9.0
22.27mm
TS-SS-11-9.0
TS-SS-11-9.5
TS-SS-11-10.0
2
9.5
10.0
Laser Mark
M18x1.5x6g.
Compression Screw Top: Clear anodized
Aluminum.
1
2
Compression Screw Bottom: Black anodized
Aluminum M18 x1.5x6g Thread. 5mm Thread ht.
Description: Torque Indicating Screw
Torque screw for 3 in lbs -10.4 in lbs.
To be used with clamshell lid sockets
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Clamshell lid socket with Torque Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Scale: N/A
Date: 5/7/08
Status: Released
Drawing: Vinayak R
File: TS-SS-11-X_X Dwg
Rev: C
TS-SS-11-X.X Drawing
© 2010 IRONWOOD ELECTRONICS, INC.
Tele: (952) 229-8200
Modified: 4/12/10
www.ironwoodelectronics.com