TS-SS-13-X.X Drawing
Note: Screw needs to be calibrated for a specific torque.
Use part numbers shown in the table below to order appropriate screw
Top View
Ø 18.6
Compression Screw Top: Clear anodized
1
2
Aluminum.
Compression Screw Bottom: Black anodized
Aluminum M6 x1x6g Thread.
Ordering Information
Part Number
TS-SS-03-0.5
TS-SS-03-0.75
Torque (in. lbs)
0.5
14.6
0.75
1.0
1
TS-SS-03-1.0
TS-SS-03-1.25
TS-SS-03-1.5
TS-SS-03-1.75
TS-SS-03-2
1.25
1.5
2
1.75
2.0
Laser Mark
Side View
M6x1x6g.
Description:SS Type-Torque Indicating Screw
Torque screw for 0 in lbs -2.2 in lbs
To be used with Clamshell lid sockets.
Compression screw needs to be turned clockwise up to the point where the
arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Clamshell socket with Torque Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Scale: N/A
Date: 5/27/08
Status: Released
Rev: B
TS-SS-13-X.X Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: (952) 229-8200
Drawing: Vinayak R
File: TS-SS-13-X_X Dwg
Modified: 8/10/09
www.ironwoodelectronics.com