TS-SG-02-X.X Drawing
Note: Screw needs to be calibrated for a
specific torque.
Use part numbers shown in the table
below to order appropriate screw
Top View
Compression Screw Top: Clear anodized
Aluminum.
1
Compression Screw Bottom: Black anodized
2
Aluminum M10 x0.75x6g Thread.
Ordering
Information
Part Number
TS-SG-02-0.5
TS-SG-02-1.0
33mm
Torque (in. lbs)
0.5
1.0
1.5
TS-SG-02-1.5
TS-SG-02-2.0
TS-SG-02-2.5
1
2
2.0
2.5
3.0
3.5
18.41mm
TS-SG-02-3.0
TS-SG-02-3.5
TS-SG-02-4.0
4.0
4.5
5.0
Laser Mark
Side View
TS-SG-02-4.5
TS-SG-02-5.0
M10x0.75x6g.
Description: Torque Indicating Screw
Torque screw for 0.5 in lbs -5.2 in lbs
To be used with swivel lid sockets.
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Swivel lid socket with Torque Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Scale: 2:1
Status: Released
Drawing: Vinayak R
File: TS-SG-02X_X Dwg
Rev: C
TS-SG-02-X.X Drawing
© 2009 IRONWOOD ELECTRONICS, INC.
Date: 6/4/08
Tele: (952) 229-8200
www.ironwoodelectronics.com
Modified: 10/21/09