TS-SG-01-X.X Drawing
Note: Screw needs to be calibrated for a specific
torque.
Use part numbers shown in the table below to
order appropriate screw
Ordering
Top View
Information
Part Number
TS-SG-01-3.0
TS-SG-01-3.5
Torque (in. lbs)
3.0
3.5
4.0
TS-SG-01-4.0
TS-SG-01-4.5
TS-SG-01-5.0
44.7
4.5
5.0
5.5
6.0
Ø 36
TS-SG-01-5.5
TS-SG-01-6.0
TS-SG-01-6.5
6.5
7.0
7.5
8.0
1
TS-SG-01-7.0
TS-SG-01-7.5
TS-SG-01-8.0
TS-SG-01-8.5
22.27mm
8.5
9.0
2
Side View
TS-SG-01-9.0
TS-SG-01-9.5
TS-SG-01-10.0
9.5
Laser Mark
10.0
M18x1.5x6g.
Compression Screw Top: Clear anodized
Aluminum.
1
2
Compression Screw Bottom: Black anodized
Aluminum M18 x1.5x6g Thread. 5mm Thread ht.
Description: Torque Indicating Screw
Torque screw for 3 in lbs -10 in lbs
To be used with swivel lid sockets.
Compression screw needs to be turned clockwise up to the point where
the arrow on top of the compression screw aligns with laser mark on the
compression screw bottom.
Swivel lid socket with Torque
Indicating Screw
Tolerances: All tolerances are ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
Scale: N/A
Date: 5/7/08
Status: Released
Drawing: Vinayak R
File: TS-SG-01-X_X Dwg
Rev: C
TS-SG-01-X.X Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: (952) 229-8200
www.ironwoodelectronics.com
Modified: 01/07/10
IRONWOOD [ IRONWOOD ELECTRONICS. ]