53.34mm
2.100"
2.54mm typ.
0.100"
Top View
53.34mm 2.100"
40.67mm 1.601"
0.64mm sqr. 0.025"
20.89mm
0.823"
10.48mm
0.413"
39.62mm
1.56" assembled
5.55mm 0.219"
17.02mm
[0.670"]
Target PLCC chip
Side View
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
(min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
FR4/G10 or equivalent high temp material. 17µm [1/2
oz.] Cu clad. SnPb plating.
1
2
3
5
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
Test points: material- Phosphor Bronze; plating- Sn
over 1.27µm [50µ"] Ni. Gold flash on contact end.
Description: PLCC Carrier Adaptor
84 position PLCC ZIF socket to 84 position PLCC clip with test points.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. Materials and specifications are subject to change without notice.
Scale: 1:0.75
Date: 2/14/01
ECO#
Rev: A
Status: Released
CA-PLCC84-Z-C-T-01 Dwg
© 2001 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
Drawing: M. Tully
File: CA-PLCC084-Z-C-T-01 Dwg.mcd
www.ironwoodelectronics.com
IRONWOOD [ IRONWOOD ELECTRONICS. ]