35.55mm
[1.400"]
35.55mm
[1.400"]
Top View
12.51mm
[0.493"]
4
2
20.30mm[0.799"]assembled
3
1
11.6mm
[0.457"]
5.25mm
[0.207"]
Side View
5
Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"]
FR4/G10 or equivalent high temp material. 17µm [1/2
oz.] Cu clad. SnPb plating.
1
Pins: shell material- Brass Alloy 360 1/2 hard;
finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni
(min.). Contact material- BeCu; finish 0.25µm
[10µ"] Au over 2.54µm [100µ"] Ni (min. ).
4
Substrate: 3.18mm ±0.18mm [0.125" ±0.007"]
FR4/G10 or equivalent high temp material. Non-clad.
2
3
Leads: material- BeCu Alloy 194; plating- 60/40
SnPb 3.80-10.16µm [150-400µ"].
Pins: material- Brass Alloy 360 1/2 hard; finish-
0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.).
5
Description: Carrier Adaptor
84 pin PLCC production socket to 84 pin surface mount foot. Top and bottom interface plug via a gold plated minigrid array.
Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position)
±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise.
Scale: 2:1
Status: Released
Rev: B
CA-PLCC84-D-P-01 Drawing
© 1995 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
Drawing: G. Nelson
File: CA-PLCC84-D-P-01 Dwg
Date: 8/1/95
Modified: 3/30/00
www.ironwoodelectronics.com
IRONWOOD [ IRONWOOD ELECTRONICS. ]