欢迎访问ic37.com |
会员登录 免费注册
发布采购

AMR2812T 参数 Datasheet PDF下载

AMR2812T图片预览
型号: AMR2812T
PDF下载: 下载PDF文件 查看货源
内容描述: [DC-DC Regulated Power Supply Module, 3 Output, 30W, Hybrid,]
分类和应用:
文件页数/大小: 7 页 / 122 K
品牌: INFINEON [ Infineon ]
 浏览型号AMR2812T的Datasheet PDF文件第2页浏览型号AMR2812T的Datasheet PDF文件第3页浏览型号AMR2812T的Datasheet PDF文件第4页浏览型号AMR2812T的Datasheet PDF文件第5页浏览型号AMR2812T的Datasheet PDF文件第6页浏览型号AMR2812T的Datasheet PDF文件第7页  
PD-94690D  
AMR28XXD SERIES  
28V Input, Dual Output  
HYBRID - HIGH RELIABILITY  
RADIATION TOLERANT  
DC-DC CONVERTER  
Description  
The AMR28XXD series of DC-DC converter modules  
has been specifically designed for operation in  
moderate radiation environments supplementing the  
higher radiation performance available in the  
International Rectifier ART2815T converter series.  
Environments presented to space vehicles operating  
in low earth orbits, launch boosters, orbiting space  
stations and similar applications requiring a low power,  
high performance converter with moderate radiation  
hardness performance will be optimally served by the  
AMR28XXD series.  
AMR  
Features  
n 30 Watts Output Power  
n Available in ± 5, ±12 and ±15 Volt Outputs  
n 16 - 40 VDC Input Range (28 VDC Nominal)  
n Total Ionizing Dose > 25KRads (Si)  
n SEE Hardened to LET up to 60 MeV.cm2/mg  
-55°C to +125°C Operating Range  
n Indefinite Short Circuit Protection  
n External Synchronization  
Shutdown from External Signal  
Flexible Mounting  
n Fully Isolated - Input to Output and to Case  
n Complimentary EMI Filter Available  
n Electrical Performance Similar to  
ATR28XXD Series  
The physical configuration of the AMR28XXD series  
permits mounting directly to a heat conduction surface  
without the necessity of signal leads penetrating the  
heat sink surface. This package configuration permits  
greater independence in mounting and more mechanical  
security than traditional packages. International  
Rectifier’s rugged ceramic seal pins are used  
exclusively in the package thereby assuring long term  
hermeticity.  
n
n
n
The AMR28XXD has been designed for high density  
using chip and wire hybrid technology that complies  
with class H requirement of MIL-PRF-38534.  
Manufactured in a facility fully qualified to MIL-PRF-  
38534, these converters are fabricated utilizing DLA  
Land and Maritime qualified processes. For available  
screening options, refer to device screening table in  
the data sheet. Applicable generic lot qualification  
test data including radiation performance can be  
made available on request. Variations to the standard  
screening can be accommodated. Consult IR San  
Jose for special requirements.  
www.irf.com  
1
10/30/12