IMP809, IMP810
P
OWER
M
ANAGEMENT
Key Features
3-Pin Microcontroller
◆
Improved Maxim MAX809/MAX810 replacement
— Lower supply current…6µA
— 80% lower maximum supply current
Power Supply Supervisor
The IMP809/IMP810 are 3.0V, 3.3V and 5.0V power supply supervisor cir-
cuits optimized for low-power microprocessor (µP), microcontroller (µC)
and digital systems. The IMP809/810 are improved drop-in replacements
for the Maxim MAX809/810 and feature 60% lower supply current.
◆
◆
◆
Monitor 5V, 3.3V and 3V supplies
140ms min. reset pulse width
Active-low reset valid with 1.1V supply
(IMP809)
A reset signal is issued if the power supply voltage drops below a preset
reset threshold and is asserted for at least 140ms after the supply has
risen above the reset threshold. The IMP809 has an active-low RESET
output that is guaranteed to be in the correct state for VCC down to 1.1V.
The IMP810 has an active-high RESET output. The reset comparator is
◆
◆
◆
Small 3-pin SOT-23 package
No external components
Specified over full temperature range
— –40°C to 105°C
designed to ignore fast transients on VCC
.
Low supply current makes the IMP809/IMP810 ideal for use in portable
and battery operated equipment. The IMP809/IMP810 are available in a
compact 3-pin SOT23 package.
Applications
Six voltage thresholds are available to support 3V to 5V systems:
Reset Threshold
◆ Embedded controllers
Suffix
Voltage (V)
◆ Battery operated systems
◆ Intelligent instruments
◆ Wireless communication systems
◆ PDAs and handheld equipment
L
M
J
4.63
4.38
4.00
3.08
2.93
2.63
T
S
R
Block Diagrams
V
CC
V
CC
IMP809
(IMP810)
V
CC
µP
RESET
Input
RESET
(RESET)
GND
GND
809/10_01.eps
IMP, Inc.
San Jose, CA
408-432-9100/www.impweb.com
IMP [ IMP, INC ]
