TECHNICAL DATA
IN74HC623A
Octal 3-State Noninverting
Bus Transceiver
High-Performance Silicon-Gate CMOS
The IN74HC623A is identical in pinout to the LS/ALS623. The
device inputs are compatible with standard CMOS outputs; with pullup
resistors, they are compatible with LS/ALSTTL outputs.
The IN74HC623A is a 3-state noninverting transceiver that is used for
2-way communication between data buses. Two separate enables are
available. The enable for bus A to B is active-high, the enable for bus B
to A is active-low.
ORDERING INFORMATION
IN74HC623AN Plastic
IN74HC623ADW SOIC
TA = -55° to 125° C for all packages
•
•
•
•
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 μA
High Noise Immunity Characteristic of CMOS Devices
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Control Inputs
Output
Enable
Direction
Operation
PIN 20=VCC
PIN 10 = GND
L
L
Data Transmitted
from Bus B to
Bus A
L
H
Data Transmitted
from Bus A to
Bus B
H
L
L
Buses Isolated
H
(High Impedance
State)
Rev. 00
IKSEMICON [ IK SEMICON CO., LTD ]
