TECHNICAL DATA
IN74ACT192
Presettable BCD/Decade UP/DOWN Counter
High-Speed Silicon-Gate CMOS
The IN74ACT192 is identical in pinout to the LS/ALS192,
HC/HCT192. The IN74ACT192 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The counter has two separate clock inputs, a Count Up Clock and
Count Down Clock inputs. The direction of counting is determined by
which input is clocked. The outputs change state synchronous with the
LOW-to-HIGH transitions on the clock inputs. This counter may be
preset by entering the desired data on the P0, P1, P2, P3 input. When
the Parallel Load input is taken low the data is loaded independently
of either clock input. This feature allows the counters to be used as
devide-by-n by modifying the count lenght with the preset inputs. In
addition the counter can also be cleared. This is accomplished by
inputting a high on the Master Reset input. All 4 internal stages are set
to low independently of either clock input.Both a Terminal Count
Down (TCD) and Terminal Count Up (TCU) Outputs are provided to
enable cascading of both up and down counting functions. The TCD
output produces a negative going pulse when the counter underflows
and TCU outputs a pulse when the counter overflows. The counter can
be cascaded by connecting the TCU and TCD outputs of one device to
the Count Up Clock and Count Down Clock inputs, respectively, of
the next device.
ORDERING INFORMATION
IN74ACT192N Plastic
IN74ACT192D SOIC
TA = -40° to 85° C for all packages
PIN ASSIGNMENT
•
•
•
•
•
TTL/NMOS Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
Outputs Source/Sink 24 mA
LOGIC DIAGRAM
PIN 16 =VCC
PIN 8 = GND
Rev. 00
IKSEMICON [ IK SEMICON CO., LTD ]
