TECHNICAL DATA
IN74ACT74
Dual D Flip-Flop with Set and Reset
High-Speed Silicon-Gate CMOS
The IN74ACT74 is identical in pinout to the LS/ALS74, HC/HCT74.
The IN74ACT74 may be used as a level converter for interfacing TTL or
NMOS outputs to High Speed CMOS inputs.
This device consists of two D flip-flops with individual Set, Reset,
and Clock inputs. Information at a D-input is transferred to the
corresponding Q output on the next positive going edge of the clock input.
Both Q and Q outputs are available from each flip-flop. The Set and Reset
inputs are asynchronous.
ORDERING INFORMATION
IN74ACT74N Plastic
IN74ACT74D SOIC
TA = -40° to 85° C for all packages
•
•
•
•
•
TTL/NMOS Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 μA; 0.1 μA @ 25°C
Outputs Source/Sink 24 mA
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Clock
Outputs
Set
L
Reset
H
Data
X
Q
Q
X
X
X
H
L
H*
H
L
L
H
H*
L
H
L
L
X
L
X
H
H
H
H
H
H
H
H
L
H
H
L
X
No Change
No Change
No Change
H
H
X
PIN 14 =VCC
PIN 7 = GND
H
X
*Both outputs will remain high as long as Set
and Reset are low, but the output states are
unpredictable if Set and Reset go high
simultaneously.
X = don’t care
Rev. 00