TECHNICAL DATA
IN74ACT534
Octal 3-State
Inverting D Flip-Flop
High-Speed Silicon-Gate CMOS
The IN74ACT534 is identical in pinout to the LS/ALS534,
HC/HCT534. The IN74ACT534 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
Data meeting the setup time is clocked, in inverted form, to the
outputs with the rising edge of the Clock. The Output Enable input does
not affect the states of the flip-flops, but when Output Enable is high, the
outputs are forced to the high impedance state. Thus, data may be stored
even when the outputs are not enabled.
ORDERING INFORMATION
IN74ACT534N Plastic
IN74ACT534DW SOIC
TA = -40° to 85° C for all
packages
•
•
•
•
•
TTL/NMOS Compatible Input Levels
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5 V
Low Input Current: 1.0 µA; 0.1 µA @ 25°C
Outputs Source/Sink 24 mA
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Clock
Output
Q
Output
Enable
D
L
L
L
H
L
L
H
L,H,
X
no
change
PIN 20=VCC
PIN 10 = GND
H
X
X
Z
X = don’t care
Z = high impedance
Rev. 00