TECHNICAL DATA
IL33091A
Powerful High-grade FET driver
Description of basic functions.
The capability of handling high voltages on power line attributed to
transient commutation of loads in conditions of automobile exploitation.
Load of microcircuit is a device on the base of MOS transistors
that enables switching high current levels in automobile electrical
system. Microcircuit has Fault indication output when there is short
circuit in load or when load transistor current level exceeds preset value.
ORDERING INFORMATION
IL33091AN Plastic
IL33091AD SOIC
TA = -40° to 125° C
for all packages.
Functions
Microcircuit provides pumping of charge (on output capacity on
pin Gate of gate control)to drive power MOS transistor. Input Input , compatible with logic levels
of CMOS microcircuits ,controls pumping of charge (switch in/switch off).
Check of drain-source voltage is implemented (VDS) on power МОS transistor, detection of
shorted load , presentation of error signal on pin Fault.
Microcircuit has pin VT of timer, that is both input in timer window comparators and output of
current square circuit, depending on r m s voltage drain-source on power MOS transistor, as power
dissipated in МОS device is proportional to VDS2.
External resistor RT and capacitor CT, connected to timer pin enable programming of timing data
necessary for protection of power MOS-device.
Internal circuit of stabilizer diodes with the total break down voltage of about 30V provides
protection of microcircuit and power МОS transistor from supply voltage value to be exceeded.
Activation of microcircuit Zener stabilizer diodes attributed to switching-off МОS transistor for the
time when supply voltage value exceeded , in addition pin Fault does not change its logic state .
1
IKSEMICON [ IK SEMICON CO., LTD ]
