EVERLIGHT ELECTRONICS CO.,LTD.
15-21SYGC/S530-E1/TR8
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 355,Zhong Shan North Rd ,WuJiang,
Tel: 0512-63409123-1603
Fax: 0512-63409123-1510
http://www.everlight.com
Economy Development Zone(YunXi Area),
SongLing Town,WuJiang City,JiangSu PRC, China.
Everlight Electronics Co., Ltd.
Device No: DSE-151-071
http://www.everlight.com
Prepared date: 8-2-2004
Rev 1.1
Page: 9 of 9
Prepared by: Malone Yu
EVERLIGHT [ EVERLIGHT ELECTRONICS CO., LTD ]
