Ericsson Internal
SEC/S Kevin Chen
PRODUCT SPECIFICATION
2 (3)
Prepared (also subject responsible if other)
No.
1/1301-BMR636 01/A4 Uen
2
Technical Specification
Approved
Checked
Date
Rev
Reference
EN/LZT 146 382 R1A June 2007
PKB 4717 PINB
DC/DC converters, Input 36-75 V, Output 10.5 A/75 W
SEC/S Kevin Chen
2007-6-21
A
© Ericsson Power Modules AB
made of Brass)
General Information
Quality Statement
The products are designed and manufactured in an
Ordering Information
See Contents for individual product ordering numbers.
industrial environment where quality systems and methods
like ISO 9000, 6σ (sigma), and SPC are intensively in use to
boost the continuous improvements strategy. Infant
mortality or early failures in the products are screened out
and they are subjected to an ATE-based final test.
Conservative design rules, design reviews and product
qualifications, plus the high competence of an engaged
work force, contribute to the high quality of our products.
Option
Suffix
P
M
LA
LB
Ordering No.
Positive Remote Control Logic
Increased stand-off height
Lead length 3.69 mm (0.145 in)
Lead length 4.57 mm (0.180 in)
Note: As an example a positive logic, increased standoff, short pin product
would be PKB 4717 PIPNBMLA.
PKB 4717 PIPNB
PKB 4717 PINBM
PKB 4717 PINBLA
PKB 4717 PINBLB
Reliability
Warranty
The Mean Time Between Failure (MTBF) is calculated at full
output power and an operating ambient temperature (TA) of
+40°C, which is a typical condition in Information and
Communication Technology (ICT) equipment. Different
methods could be used to calculate the predicted MTBF
and failure rate which may give different results. Ericsson
Power Modules currently uses Telcordia SR332.
Warranty period and conditions are defined in Ericsson
Power Modules General Terms and Conditions of Sale.
Limitation of Liability
Ericsson Power Modules does not make any other
warranties, expressed or implied including any warranty of
merchantability or fitness for a particular purpose
(including, but not limited to, use in life support
applications, where malfunctions of product can cause
injury to a person’s health or life).
Predicted MTBF for the series is:
-
1.5 million hours according to Telcordia SR332, issue
1, Black box technique.
The Ericsson failure rate data system is based on field
tracking data. The data corresponds to actual failure rates
of components used in ICT equipment in temperature
controlled environments (TA = -5...+65°C).
Telcordia SR332 is a commonly used standard method
intended for reliability calculations in ICT equipment. The
parts count procedure used in this method was originally
modelled on the methods from MIL-HDBK-217F, Reliability
Predictions of Electronic Equipment. It assumes that no
reliability data is available on the actual units and devices
for which the predictions are to be made, i.e. all predictions
are based on generic reliability parameters.
Compatibility with RoHS requirements
The products are compatible with the relevant clauses and
requirements of the RoHS directive 2002/95/EC and have a
maximum concentration value of 0.1% by weight in
homogeneous materials for lead, mercury, hexavalent
chromium, PBB and PBDE and of 0.01% by weight in
homogeneous materials for cadmium.
Exemptions in the RoHS directive utilized in Ericsson
Power Modules products include:
-
Lead in high melting temperature type solder (used to
solder the die in semiconductor packages)
Lead in glass of electronics components and in
electronic ceramic parts (e.g. fill material in chip
resistors)
-
-
Lead as an alloying element in copper alloy containing
up to 4% lead by weight (used in connection pins
ERICSSON [ ERICSSON ]
