欢迎访问ic37.com |
会员登录 免费注册
发布采购

B25671A3497A375 参数 Datasheet PDF下载

B25671A3497A375图片预览
型号: B25671A3497A375
PDF下载: 下载PDF文件 查看货源
内容描述: 薄膜电容器 - 功率因数校正 [Film Capacitors - Power Factor Correction]
分类和应用: 电容器薄膜电容器功率因数校正
文件页数/大小: 8 页 / 112 K
品牌: EPCOS [ EPCOS ]
 浏览型号B25671A3497A375的Datasheet PDF文件第1页浏览型号B25671A3497A375的Datasheet PDF文件第2页浏览型号B25671A3497A375的Datasheet PDF文件第3页浏览型号B25671A3497A375的Datasheet PDF文件第4页浏览型号B25671A3497A375的Datasheet PDF文件第5页浏览型号B25671A3497A375的Datasheet PDF文件第6页浏览型号B25671A3497A375的Datasheet PDF文件第8页  
Film Capacitors – Power Factor Correction  
PoleCap capacitor  
B25671A4417A375  
MKK440-D-25-P  
Choosing the best spot for mounting  
Especially in regions with long periods of sunshine and high temperatures, the PoleCap should be  
installed in such a way that it is located in the shadow of the pole for most of the daylight. The  
combination of the natural cooling by the wind and the single-housing of the capacitor helps to keep  
the hot spot temperature at the lowest level possible.  
Maintenance  
Check tightness of the connections/terminals periodically.  
Take current reading twice a year and compare with nominal current. Use a harmonic analyser or  
true effective RMS-meter.  
In case of current above the nominal current check your application for modifications.  
If a significant increase in the amount of non-linear loads has been detected, then a consultant  
has to be called in for a harmonic study.  
In case of the presence of harmonics installation of a de-tuned capacitor bank (reactors) must be  
considered.  
Check the discharge resistors/reactors and in case of doubt, check their function:  
(1) Power the capacitor up and down.  
(2) After 60 seconds the voltage between the terminals must decline to 50 V or less.  
Check the temperature of capacitors directly after operation for a longer period, but make sure  
that the capacitors have been switched off. In case of excessive temperature of individual  
capacitors, it is recommended to replace these capacitors, as this should be an indication for loss  
factor increase, which is a sign for reaching end of life.  
Storage and operating conditions  
Do not use or store capacitors in corrosive atmosphere, especially where chloride gas, sulfide gas,  
acid, alkali, salt or the like are present. In dusty environments regular maintenance and cleaning  
especially of the terminals is required to avoid conductive path between phases and/or phases and  
ground.  
Note  
For detailed information about PFC capacitors and cautions, refer to the latest version of EPCOS PFC  
Product Profile.  
FK PC PM PFC  
June 2009  
Please read Cautions and warnings and  
Page 7 of 8  
Important notes at the end of this document.