Pressure sensors
Gauge pressure transducers
AK2 series
Description
ꢀ The transducers are based on piezoresistive silicon pressure sensors
from our own clean room.
ꢀ The robust stainless steel/plastic casing is accentuated
through its excellent mechanical decoupling.
Features
ꢀ Piezoresistive MEMS technology
ꢀ Measured media:
Air, non-aggressive gases (gas humidity 0 ... 100% r.h.)
and non-aggressive fluids.
Unsuitable for substances which react with glass, silicon, stainless
steel, silicone glue (pr ≤ 10 bar) or epoxy glue (pr > 10 bar).
ꢀ Whetstone bridge with mV output, proportional to pressure
and ratiometric to supply voltage
ꢀ RoHS-compatible, halogen-free
ꢀ Dual-in-line package for PCB mounting
Dimensional drawings
Type KD (4.8 mm tube fitting)
Type KC (M5 thread connection)
All dimensions in mm
AS SEN PD
2009-08-03
Please read Cautions and warnings and
Page 2 of 7
Important notes at the end of this document.