EUROPE
ASIA
AMERICAS
Astec House, Waterfront Business Park
Merry Hill, Dudley
Units 2111-2116, Level 21
Tower1, Metroplaza
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
2
Input Voltage
Output Voltage
Output Current
Efficiency
Model Number
36V to 75V
36V to 75V
36V to 75V
36V to 75V
36V to 75V
36V to 75V
36V to 75V
12.0V
5.0V
3.3V
2.5V
1.8V
1.5V
1.2V
10A
20A
30A
35A
40A
40A
40A
93.0%
92.0%
91.0%
89.5%
88.0%
86.0%
85.0%
A(X)O10B48 (N) - (6)(S)(L)
A(X)O20A48 (N) - (6)(S)(L)
A(X)O30F48 (N) - (6)(S)(L)
A(X)O35G48(N) - (6)(S)(L)
A(X)O40Y48 (N) - (6)(S)(L)
A(X)O40M48(N) - (6)(S)(L)
A(X)O40K48 (N) - (6)(S)(L)
OPTIONS:
(X)
:
“L” = Open Frame / Low Profile
“E” = Baseplate Construction
(N)
(6)
(S)
(L)
:
:
:
:
"N" = designates Negative Logic Enable (default is Positive Enable with no suffix “N” required)
“-6” = 3.7mm nominal pin length (default is 5mm nominal pin length with no suffix “-6” required)
“-S”= Surface Mount Termination (default is Through Hole Termination with no suffix “-S” required)
7
“L” = RoHS compliant (RoHS 6) / “Blank” - RoHS compliant with Lead (PB) in solder exemption (RoHS 5)
ALO - OPENFRAME
0.15
[3.8]
Pin Assignment
2.19
[55.5]
0.30
[7.6]
0.15
[3.8]
Single Output
0.45
[11.4]
0.45
[11.4]
1. +Vin
0.60
[15.2]
0.75
[19.1]
0.75
[19.1]
2. Enable (On/Off)
3. -Vin
4. -VOUT
5. -Sense
6. Trim
7. +Sense
8. +VOUT
0.15
[3.9]
SMT - Termination
TH - Termination
0.31
[7.9]
0.32
[8.2]
Notes:
1. Measured at 20 MHz bandwidth with external 10 µF
PIN LENGTH
A
See A
tant. capacitor in parallel with 0.1 µF ceramic
Std Pin Length: 0.189 [4.8] MIN
0.205 [5.2] MAX
“-6” Option:
capacitor connected across +Vout and -Vout; 220 µF
e-cap or equivalent connected across +Vin and -Vin.
0.137 [3.5] MIN
0.152 [3.9] MAX
2. Efficiency measurements are typical values taken at
AEO -BASEPLATE
full load, nominal line and T = 25°C.
A
0.15
[3.8]
3. All specifications are typical at nominal line, full load
2.00
[50.8]
0.30
0.15
[3.8]
[7.6]
0.45
and T = 25°C unless otherwise noted.
A
4. All specifications subject to change without notice.
0.45
[11.4]
5. Mechanical drawings are for reference only.
Dimensions are in inches [mm]. Pin placement
tolerance 0.005 [0.127]. Mechanical Tolerance
0.02 [0.5], recommended surface mount pads (min:
0.080 x 0.112 [2.03 x 2.84] / max: 0092 x 0.124
[2.34 x 3.15]); through hole pin diameter (Pins 4 & 8)
∅ = 0.062 [1.57], others ∅ = 0.04 [1.0] (6X).
[11.4]
0.60
0.75
[19.0]
[15.2]
0.75
[19.0]
PIN 1
PIN 8
0.15
[3.9]
SMT - Termination
TH - Termination
0.39
[9.8]
6. Technical Reference Notes should be consulted for
detailed information when available.
7. AEOxxxxxx-Sx series (surface mount termination
with baseplate) are not reflow compatible.
8. Warranty 2 yrs.
0.40
[10.1]
0.23
[5.8]
Astec reserves the right to make changes to the information
contained herein without notice and assumes no liability as a
result of its use and application. (REV 02: MARCH 7, 2007)
See A
www.astecpower.com
3
EMERSON-NETWORKPOWER [ EMERSON NETWORK POWER ]
