1751A 1550 nm DWDM DFB Laser Module
DATASHEET | FEBRUARY 2012
FIBER OPTICS
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1 laser
product. This device has been classified with the FDA/CDRH under accession number 0220191.
All Versions of this laser are Class 3B laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Single-mode fiber pigtail with SC/APC connectors (standard).
Wavelength = 1.5 µm.
Maximum power = 30 mW.
Because of size constraints, laser safety labeling (including an FDA class 1 label) is not affixed to the module, but attached
to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous
laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
Avoid direct exposure to beam
AVOID DRIARDEICATTEIOXNPOSURE TO BEAM
INVISIBLE LASER
Do not view beam directly with
optical instruments
µ
m
Wavelength: 1.3
Max. Output: 50 mW,
Class 1 Laser Product
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
µ
m
Wavelength: 1.3
Class 1 Laser Product IEC-60825-1:20007 Max. Output:50 mw
|
REV 2012.02
Information contained herein is deemed reliable and accurate as of the issue date. E M C O R E reserv es the rig ht to chang e the desig n or sp ecification at any time w ithout notice.
EMCORE [ EMCORE CORPORATION ]
