1623 O-Band DWDM DFB Laser Component
Pin Definitions
DATASHEET| MARCH 3, 2010
Pin
1
Description
Thermistor
2
Thermistor
3
4
5
Dc Laser Bias (-)
MPD Anode (-)
MPD Cathode (+)
6
7
8
Thermal Electric Cooler (+)
Thermal Electric Cooler (-)
Case Ground
9
Case Ground
10
11
12
13
14
NC
Laser Common (+)
Laser Modulation (-)
Laser Common (+)
NC
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH
Class 1 laser product. This device has been classified with the FDA/CDRH under accession number 0220191.
All Versions of this laser are Class 1 laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Single-mode fiber pigtail with SC/APC connectors (standard).
Wavelength = 1.3 µm.
Maximum power = 50 mW.
Because of size constraints, laser safety labeling (including an FDA class 1 label) is not affixed to the module,
but attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in
hazardous laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
INVISIBLE LASER RADIATION
Avoid direct exposure to beam
AVOID DIRECT EXPOSURE TO BEAM
Do not view beam directly with
optical instruments
µ
m
Wavelength: 1.3
Max. Output: 50 mW,
Class 1 Laser Product
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
Avoid exposure to beam
µ
m
Wavelength: 1.3
Class 1 Laser Product IEC-60825-1:20007 Max. Output:50 mw
5
EMCORE CORPORATION
EMCORE [ EMCORE CORPORATION ]
