EBE21UE8AESA
Electrical Specifications
• All voltages are referenced to VSS (GND).
Absolute Maximum Ratings
Parameter
Symbol
VT
Value
Unit
Notes
1
Voltage on any pin relative to VSS
Supply voltage relative to VSS
Short circuit output current
Power dissipation
–0.5 to +2.3
–0.5 to +2.3
50
V
VDD
IOS
PD
V
mA
W
°C
°C
1
8
Operating case temperature
Storage temperature
TC
0 to +95
–55 to +100
1, 2
1
Tstg
Notes: 1. DDR2 SDRAM component specification.
2. Supporting 0°C to +85°C and being able to extend to +95°C with doubling auto-refresh commands in
frequency to a 32ms period (tREFI = 3.9µs) and higher temperature self-refresh entry via the control of
EMRS (2) bit A7 is required.
Caution Exposing the device to stress above those listed in Absolute Maximum Ratings could cause
permanent damage. The device is not meant to be operated under conditions outside the limits
described in the operational section of this specification Exposure to Absolute Maximum Rating
conditions for extended periods may affect device reliability.
DC Operating Conditions (TC = 0°C to +85°C) (DDR2 SDRAM Component Specification)
Parameter
Symbol
VDD, VDDQ
VSS
min.
typ.
1.8
0
max.
1.9
0
Unit
V
Notes
4
Supply voltage
1.7
0
V
VDDSPD
VREF
1.7
—
3.6
V
Input reference voltage
Termination voltage
DC input logic high
DC input low
0.49 × VDDQ
VREF − 0.04
VREF + 0.125
−0.3
0.50 × VDDQ 0.51 × VDDQ
V
1, 2
3
VTT
VREF
VREF + 0.04
VDDQ + 0.3
VREF – 0.125
V
VIH (DC)
VIL (DC)
VIH (AC)
VIL (AC)
V
V
AC input logic high
AC input low
VREF + 0.200
V
VREF – 0.200
V
Notes: 1. The value of VREF may be selected by the user to provide optimum noise margin in the system. Typically
the value of VREF is expected to be about 0.5 × VDDQ of the transmitting device and VREF are expected
to track variations in VDDQ.
2. Peak to peak AC noise on VREF may not exceed ±2% VREF (DC).
3. VTT of transmitting device must track VREF of receiving device.
4. VDDQ must be equal to VDD.
Data Sheet E1298E40 (Ver. 4.0)
9
ELPIDA [ ELPIDA MEMORY ]
