欢迎访问ic37.com |
会员登录 免费注册
发布采购

EBE21RD4ABHA-4A-E 参数 Datasheet PDF下载

EBE21RD4ABHA-4A-E图片预览
型号: EBE21RD4ABHA-4A-E
PDF下载: 下载PDF文件 查看货源
内容描述: 注册2GB DDR2 SDRAM DIMM ( 256M字× 72位, 2级) [2GB Registered DDR2 SDRAM DIMM (256M words x 72 bits, 2 Ranks)]
分类和应用: 存储内存集成电路动态存储器双倍数据速率时钟
文件页数/大小: 22 页 / 173 K
品牌: ELPIDA [ ELPIDA MEMORY ]
 浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第2页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第3页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第4页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第5页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第6页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第7页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第8页浏览型号EBE21RD4ABHA-4A-E的Datasheet PDF文件第9页  
DATA SHEET
2GB Registered DDR2 SDRAM DIMM
EBE21RD4ABHA
(256M words
×
72 bits, 2 Ranks)
Description
The EBE21RD4ABHA is a 256M words
×
72 bits, 2
ranks DDR2 SDRAM Module, mounting 36 pieces of
512M bits DDR2 SDRAM with sFBGA stacking
technology. Read and write operations are performed
at the cross points of the CK and the /CK. This high-
speed data transfer is realized by the 4bits prefetch-
pipelined architecture. Data strobe (DQS and /DQS)
both for read and write are available for high speed and
reliable data bus design. By setting extended mode
register, the on-chip Delay Locked Loop (DLL) can be
set enable or disable. This module provides high
density mounting without utilizing surface mount
technology.
Decoupling capacitors are mounted
beside each SDRAM on the module board.
Note: Do not push the cover or drop the modules in
order to avoid mechanical defects, which may
result in electrical defects.
Features
240-pin socket type dual in line memory module
(DIMM)
PCB height: 30.0mm
Lead pitch: 1.0mm
Lead-free
1.8V power supply
Data rate: 533Mbps/400Mbps (max.)
1.8 V (SSTL_18 compatible) I/O
Double-data-rate architecture: two data transfers per
clock cycle
Bi-directional, data strobe (DQS and /DQS) is
transmitted /received with data, to be used in
capturing data at the receiver
DQS is edge aligned with data for READs; center
aligned with data for WRITEs
Differential clock inputs (CK and /CK)
DLL aligns DQ and DQS transitions with CK
transitions
Commands entered on each positive CK edge; data
referenced to both edges of DQS
Four internal banks for concurrent operation
(Components)
Burst length: 4, 8
/CAS latency (CL): 3, 4, 5
Auto precharge option for each burst access
Auto refresh and self refresh modes
7.8µs average periodic refresh interval
Posted CAS by programmable additive latency for
better command and data bus efficiency
Off-Chip-Driver Impedance Adjustment and On-Die-
Termination for better signal quality
/DQS can be disabled for single-ended Data Strobe
operation
1 piece of PLL clock driver, 4 piece of register driver
and 1 piece of serial EEPROM (2k bits EEPROM) for
Presence Detect (PD)
Document No. E0451E20 (Ver. 2.0)
Date Published July 2004 (K) Japan
URL: http://www.elpida.com
Elpida
Memory, Inc. 2004