Triple 60mA Linear LED Controller
Preliminary Information - Jan 21, 2015
E522.84/85/86/87
Electrical Characteristics (continued)
(VVS = 5V to 25V, TJ= -40°C to +150°C and recommended operating range, unless otherwise noted. Typical values are at VVS
=
14V and TJ = 25°C. Positive currents flow into the device pins.)
Description
Condition
Symbol
Min
Typ
Max
Unit
IRx Pin Open Diagnostic Threshold
IIR,OPEN
9
18
µA
µA
µs
IRx pin short circuit Diagnostic Threshold
Error Tolerance after Enabling a Channel
IIR,SHORT
280
380
64
4
VENA > VENA,ON
tERR,DEB1
tERR,DEB2
tERR,REDIAG
2)
VIR < VIR,DIS
Additional Debouncing Time in case of Error New Error de-
Detection during Operation*)
µs
tected
Re-Diagnosis time out in case of Error
Detection
ERR present,
4.1
5.9
9.1
ms
E522.8x operated 3)
*) Not tested in production
Notes on table section RUN Interface and Diagnostics
2) start up of a channel is performed within this tolerance time window
3) re-diagnosis is performed on either this timebasis or with each rising edge at ENA
This document contains information on a pre-production product. Elmos Semiconductor AG reserves the right to change specifications and information herein without notice.
Elmos Semiconductor AG
Data Sheet
QM-No.: 25DS0137E.00
8/20
ELMOS [ ELMOS SEMICONDUCTOR AG ]
