GD25Q64CxIGx 3.3V Uniform Sector Dual and Quad Serial Flash
http://www.elm-tech.com
1. FEATURES
64M-bit Serial Flash
Program/Erase Speed
♦
♦
- 8192K-byte
- Page Program time: 0.6ms typical
- Sector Erase time: 50ms typical
- Block Erase time: 0.15/0.20s typical
- Chip Erase time: 25s typical
- 256 bytes per programmable page
Standard, Dual, Quad SPI
♦
- Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
- Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
- Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
Flexible Architecture
♦
♦
♦
- Sector of 4K-byte
- Block of 32/64K-byte
High Speed Clock Frequency
♦
♦
Low Power Consumption
- 120MHz for fast read with 30PF load
- Dual I/O Data transfer up to 240Mbits/s
- Quad I/O Data transfer up to 480Mbits/s
- Continuous Read With 8/16/32/64-byte Wrap
- 20mA maximum active current
- 5μA maximum power down current
Advanced Security Features(1)
Software/Hardware Write Protection
- 3×1024-Byte Security Registers With OTP Locks
- Discoverable parameters(SFDP) register
- Write protect all/portion of memory via software
- Enable/Disable protection with WP# pin
- Top or Bottom, Sector or Block selection
Single Power Supply Voltage
- Full voltage range: 2.7~3.6V
♦
Cycling endurance
♦
♦
Information
♦ Package
-
Minimum 100,000 Program/Erase Cycles
- SOP8 (208mil)
Data retention
- WSON8 (6×5mm)
-
20-year data retention typical.
Note: (1) Please contact ELM for details.
Rev.1.1
50 - 4
ELM [ ELM ELECTRONICS ]
